Parking System Knowledge
What problems should be paid attention to when installing the parking lot system
With the development of technology, the parking lot system is now developing in the direction of Vietnam, intelligent, and unmanned, so this requires good quality and stable performance in the parking lot. Come to some unnecessary troubles.
The installation of the parking lot system First of all, we should pay attention to the installation location of the gate and the controller, because the installation location is properly related to whether the user is convenient. Generally, we recommend that the distance between the gate and the controller is at least 2.5 meters. Because the distance is too close, it may cause the car owner to touch the tunnel railings when the car is parking the card, so we recommend that the distance between the gate and the controller is best about 3.5 meters; secondly An important factor for installation is that because the lane is too narrow, it will affect the unobstructed vehicle in and out, so we recommend that the width is about 4.5 meters; in addition, the surveillance camera will be installed in the parking lot system, and there must be a monitoring of the location of the camera and the gate. The appropriate distance, because the perspective of the camera must cover the location of the license plate when the vehicle card reads the card, we generally recommend that the distance from the camera is about 1 meter; the size of the sentry box, the position of the deceleration belt, and the position of the control center are all all. It is some important factors we should pay attention to when installing the parking lot system.
At present, the parking lot system is more and more widely used. For example, commercial square toll parking lots, community parking lots, government agencies, airports, etc., but different use needs will have different requirements for the parking lot system and hardware, but no matter what kind of parking lots, no matter what kind of parking lot, The installation requirements must be strict and meticulous.